Bezdan Cable Railing: Plan the Deck-to-Stair Fittings

Bezdan cable railing can serve both decks and stairs, but the end fittings for a level run are not automatically the right pair for a sloped run. The useful question is which fitting belongs at each end of each cable. In Bezdan’s through-post metal system, its stair instructions call for a tensioning-type fitting at both ends—even though only one end performs the tensioning.

That distinction matters when a flat deck leads into a stair flight. This guide explains a specific Bezdan fitting example, then shows how to evaluate a complete Senmit stair package as a separate system. Product information was checked on November 13, 2026.

Senmit rendering of a black stair cable railing with three surface mounted posts and a sloped top rail.
Senmit Express stair railing rendering, shown as a complete-system comparison. This is not Bezdan hardware or a structural approval.

First identify what the Bezdan order includes

Bezdan offers standard cable kits as well as individual components. Its cable system overview describes a standard kit as the cable, end fittings and washers for one cable run. It also sells posts and handrail components. A single-cable kit therefore should not be read as one complete railing section with every post and rail included.

Keep those purchasing units separate on your drawing: the framework, the cable rows within it, and the fittings that terminate each row. If you are keeping existing posts, have the supplier approve their use in the proposed system. If you need new posts and rails, include them in the same project specification before comparing totals.

The stair fitting pair is the detail to resolve

Bezdan’s current through-post metal fitting page distinguishes level and stair applications. The following examples refer to that product family, not every fitting Bezdan sells.

Listed part Application and function Ordering consequence
CR1610 Receiver-cone, non-tensioning stud for a level metal-post run Do not carry this level-only selection into the stair line item.
CR1605-L Receiver-cone tensioning fitting for a level run Retain the complete part designation when asking for the matching opposite end.
CR1605-S Receiver-cone tensioning fitting listed for stairs, used with a beveled washer For this stair arrangement, specify the appropriate fitting at both ends and identify which end will be tensioned.

The linked CR1605/CR1705 stair instructions, revision 10/23, make the distinction explicit: both end posts receive the tensioning-type fitting; one acts as the non-tensioning end and is installed first. The physical part and its job in the assembled run are separate ideas.

For one cable row, that means two specified end fittings, not a level non-tensioner carried over because it looks similar. A shared cable diameter also does not establish that fittings, cable construction and posts from different systems are interchangeable.

Mark the deck-to-stair transition before ordering

Use two labels on the sketch: “D” for the level deck segment and “S” for the sloped stair segment. For each, write the exact fitting at the first end and the exact fitting at the second end. The supplier should be able to explain every change between the D and S lines.

At the top landing, mark whether the cable ends and starts again or follows a manufacturer-approved transition. Do not assume that a continuous-looking top rail means a continuous cable path. Add a close photo of the landing post and a side view of the stair slope so the supplier can assess the actual connection.

Access matters too. Bezdan’s installation FAQ says its through-post installation needs access to both sides of the post. A wall tight behind an end post can change the proposed fitting arrangement. Identify that obstruction before the parts list is finalized.

This fitting plan is not a structural design. Post attachment, guard openings and any separate handrail requirement still need review for the project and its local requirements. For the framework discussion, see our guide to planning railing posts along long stair sections.

Where a Senmit complete stair package fits

If you need the posts and top rail as well as cable infill, the Senmit Express stainless steel stair railing kit is a complete-system option to evaluate separately. Its current selectable sizes are 5, 10, 15 and 20 Feet. Those are ordering options, not a guarantee that a package fits an unreviewed stair layout.

Senmit component illustration showing a five-foot top rail, adjustable stair posts, cable and end fittings.
Senmit five-foot package illustration. Confirm quantities against the selected SKU; this image does not specify a Bezdan order or authorize mixing brands.

The product listing includes adjustable-top stair posts, top rail, cable, end fittings, sleeves and angle washers, with quantities varying by package. It lists a cable cutter and states that the hydraulic crimper is sold separately. Have the selected package confirmed against your stair measurements; use the matching Senmit instructions rather than transferring the Bezdan end-fitting arrangement.

Keep the comparison at the system level. Ask Bezdan for its specified framework and stair fitting pair. Ask Senmit for its selected package and any project-specific additions. Neither the images here nor the shared use of stainless steel establishes cross-brand compatibility.

Senmit marketing illustration showing four broad stages of assembling its stair cable railing.
Senmit assembly overview. This marketing graphic is not a complete installation manual; use the instructions for the system being installed.

Send a drawing that makes the end connections visible

For a Senmit package review, send the design team your deck and stair drawing with the D and S segments labeled. Include the stair rise and run, proposed post positions, close photos of the landing transition, and any wall that restricts access behind an end post.

Ask for a parts list that identifies both ends of every distinct segment. Once those connections are resolved, the package comparison becomes meaningful: you can see which complete arrangement serves the deck, the stairs and the point where they meet.

Back to blog